This page is intended for those who want to build their own arcade machine or classic game controllers. If you're planning to restore an existing arcade cabinet, please take a look at the topic restoration.
There are a dizzying variety of skills, disciplines, methods, materials, and resources involved in this hobby. This FAQ is intended to provide a a general overview of basic topics and common terms for newcomers to the arcade and emulation community. It is designed to be a starting point for choosing useful search terms and asking better/more effective questions in the BYOAC Forums.
The original FAQ written in 2003 by CitznFish is available via the Internet Wayback Machine at http://web.archive.org/web/20081006130304/http://www.arcade-at-home.com/mame_faq.html
- 1 Cabinet Basics
- 2 Building your own Arcade
- 3 Controls
- 4 Encoders
- 5 Basic wiring
- 6 LED Lighting
- 7 Displays (Arcade CRT/Computer CRT/LCD/LED)
- 8 Software
- 9 Forum tips for asking questions that get good/faster answers:
Main article Basics.
Arcade cabinets (often shortened to 'cabs') is a gaming machine that includes the screen to display the game, controls to play the game and the computer hardware that runs the game.
Types of cabs
Main article Arcade Cabinet.
Arcade cabinets come in various shapes and sizes. Commercially build and operated cabinets are often build to play a single game and are therefore created to match the target audience or recreate the atmosphere of the game.
A standing cabinet is the most common cabinet in North America and Europe. Players are standing in front of the machine while playing the game.
- Regular, the iconic, archetype, arcade cabinet. The monitor is usually above waist height with the marquee overhanging.
- Cabaret, a slightly smaller version of the regular cabinet.
- Low-boy, a standup cabinet where the marquee is in the same plane as the monitor making the cabinet much lower, hence the name.
- Pedestal, a arcade where the screen is not part of the arcade setup. The monitor could be a TV or projection attached to a wall.
- Showcase, a setup where the screen is in a separate housing as the control panel but still visually part of one setup. Setups like this usually feature a large screen positioned in such way that onlookers may view the action. The 'showcase' may both refer to the player being able to showcase his or her gaming skill as to the elaborate arcade setup itself.
Seated cabinets come in two distinct categories; arcade cabinets intended to sit at for easier long play sessions or themed cabinets that involve an activity where sitting down mimics the action of the game (such as driving a car).
- Candy, the most common cabinet in Japan. The cabinets are often made of hard plastic- the shiny plastic appearance owes them the name 'candy cabinets'. These cabinets are quite similar to standup cabinets except that they are lower and have and often have a larger control panel surface.
- Cocktail, the most common sit-down type in North America. An arcade that much resembles a table with the screen embedded in the table surface. The surface is made of hardened glass so people can place their drinks.
- Cockpit, an arcade that mimics the cockpit of a racecar, fighterplane or spacecraft. The controls are often matched to the type of vehicle portrayed- such as a steering wheel, pedals, gear shifter and flight yoke.
- Ride-on, similar to the cockpit arcade, a ride-on often is build specific to the activity of the game(s) played. Ride-on cabinets may feature a motorbike or jetski seat but also less obvious vehicles such as a miningcart.
Another category of cabinets are the small size cabinets.
- Mini, a small version of a cabinet resized to suit play for children.
- Bartop, a portable cabinet that can be placed on top of a table (or as the name suggests, on the bartop in a pub or diner).
- Micro, micro cabinets are extremely scaled down cabinets. Building a functioning micro cabinet provides experiences cabinet builders a new challenge. Micro cabinets provide a eye catching model for display.
Some arcade cabinets are built for a single gametype or purpose.
- Digital Pinball Table, a digital pinball machine is an arcade designed to look and act like an actual pinball machine- however the playfield and backglass are replaced by monitors and play pinball software instead of an actual metal ball. See also: Pinball.
Parts of a cabinet
Main article Arcade_Cabinet#Anatomy_of_a_cabinet.
Building your own Arcade
Main article Building.
What type of build meets my needs?
The most common pitfill of arcade building is "to build something that does everything" and end up with a monster of a machine with controls often nicknamed frankenpanel by the community. It is advised to consider what you want to achieve and what your limitations are before starting to build.
- Start by considering where you want to put/use the cab. Things like measuring the doorways so you can actually move the arcade from the place of construction to the gameroom. Give sitdown, cocktail or even showcase models a consideration.
- Make a list of games you want to play. Often the list of games provides a clue as of what style of games you like. Consider designing an arcade to match those types of games. This may impact things like Monitor orientation or number of pushbuttons.
- Consider the number of simultaneous players you want to support. Keep in mind that more players means adapting your control panel; the more controls the more room you'll need (space might be an issue). If you plan to support more than 2 players, make sure all players have a good view on the screen. Also more players might mean a bigger budget- keep in mind that there are alternatives like using USB joypads for letting other players join in.
- From there, you can figure out what kind of controls you'll need to work with the games. The list of games you want to play may provide enough information on what controls you will need. Joysticks come in many variants, so you might want to do some research. Some games or consoles require analog controls. Keep in mind that some controls can be used as alternative: for example a trackball might also work as a spinner or mouse. A spinner might also work as a steering wheel. Note that reusing controls is also subject to personal preference and is an often discussed subject within the community.
- What computer you do want/need to use. Newer games means a newer computer. If you already have a computer you plan to use, try some emulators on it to see what games it is capable of running - cross check this with the games you want to play.
- That will lead you to what emulators and other software like front-ends you want/need. Emulators are programs that can make the computer act as a (retro)gaming system such as an arcade machine or game consoles. Do you want the players to be able to switch games? There are many programs where players can select and start games (this kind of software programs are known as front-ends. Configuring the computer to run old games is also part of the hobby!
-- That leads to chosing the right encoder(s).
-- Browse for artwork/themes/design cues to use in the following steps.
-- Arrange the controls on the control panel. (CP) Cardboard test panel highly encouraged.
-- Select a monitor.
-- Design the rest of the cab around the monitor and CP.
-- Should I build a four player setup?
-- Regular vs. swappable vs. modular panels
-- What controls should I include?
What is the difference between an original arcade cab and a MAME cab?
What is JAMMA/JAMMA+?
JAMMA is a wiring standard developed in 1985 by Japan Amusement Machine and Marketing Association, Inc.
It allows you to easily change between JAMMA compatible game boards without re-wiring the cabinet.
The JAMMA standard uses a 56-pin edge connector on the board with inputs and outputs common to most video games.
- Power inputs (5v and 12v)
- Inputs for two players (each player has a joystick, three action buttons and one start button)
- Analog RGB video output with negative composite sync
- Mono sound output
- Inputs for coin, service, test, and tilt
JAMMA Games that have more than 3 action buttons, more than 2 players, or different control types use the JAMMA+ standard.
What type of wood to use?
What tools do I need?
-- Forstner bits, spade bits, holesaw
-- Circular saw / sawboard
-- switchable, auto-switch
-- 3 terminal buttons (NO, NC, COM)
-- 2 terminal buttons
-- Leaf buttons
Other specialized controls
Yokes, steering wheels, trigger stick, rotary joysticks, light guns, etc.
-- Mounting plate
-- Under-mount (non-recessed)
-- Under-mount (recessed)
-- Carriage bolts
-- Threaded inserts
-- Support blocks
What is an encoder?
What ports do they use?
What type of encoder(s) do I need?
(keyboard, gamepad, optical, combination/hybrid?)
How many encoder inputs do I need for my control panel?
Quick disconnect sizes
Most microswitches use 0.187" QDs. (4.8 mm)
Some use 0.250" QDs. (6 mm)
Most two tab buttons (Sanwa, Seimitsu, Goldleaf, etc.) and leaf switches use 0.110" QDs. (2.8 mm)
Commonly used AWG sizes
Most control panels use between 20AWG and 30AWG wire to connect controls.
22AWG stranded wire is a popular choice -- small enough to work with fairly easily, big enough for solid crimp connections and carrying current for many LED setups.
How do I wire microswitches to an encoder?
Diagram or picture showing three microswitches wired to an encoder and a daisy-chain ground.
Most arcade LEDs are designed to run on either 5v or 12v circuits.
You can use 12v LEDs powered by 5v for extremely-low power consumption -- commonly used for standalone USB control panels to avoid the use of a second cable for LED power.
These are lit by a single-color LED.
Can be hard-wired to operate like single color buttons, but the most common way to use these LEDs is with a controller.
These LEDs have 4 wires: Operating voltage (yellow wire), red ground, green ground, and blue ground
Displays (Arcade CRT/Computer CRT/LCD/LED)
Types of connections
(composite, component, arcade, VGA, DVI, HDMI)
Input lag (Not response time)
(MAME, console emulators, pinball, flash games)
What is an emulator?
A software program that duplicates the hardware, firmware/software, and gameplay of an older game system.
What is a ROM?
For the original games - Read Only Memory chip(s) on the game board/cartridge that holds the program code for a game/game system. For emulators - .ZIP file(s) containing a dump of the game/game system code.
What are the different "flavors" of MAME?
MAME - The command line program that the other variants are based on. MAME32, MAMEUI, or MAMEUIFX - Graphic User Interface (GUI) versions of MAME.
Why won't this ROM work with the newer version of that emulator?
The game may not be fully functional yet. (Encryption issues, driver problems, incomplete ROM dumps, etc.) There may be a more accurate "dump" of that game's ROM used by the newer emulator -- emulator and ROM versions must be compatible. You may also need other driver files or a .CHD (Compressed Hunks of Data) hard drive image.
How can I tell if my ROMs and emulator are compatible?
Use clrmamepro http://mamedev.emulab.it/clrmamepro/ or your emulator's "Audit" function (if available) to check the version and filenames of ROMs compared to your emulator program version.
Other useful software
(Joy2key, DrVenture's controller remap?, AHK?, mrotate?)
Forum tips for asking questions that get good/faster answers:
- Search first, somebody else has probably encountered this problem before -- don't ask people to retype the same old answers to the same old questions.
- Take your time editing the post so it is specific, clear, and easy to read.
- Whenever possible, include decent pics/screencaps/diagrams.
- Include software/OS versions if applicable.
- Include your location when asking about parts/vendors or electrical wiring. (different countries use different wire colors and/or voltages)