Difference between revisions of "Overview & Options to Consider"

From BYOAC New Wiki
Jump to navigation Jump to search
m (Resto-mod graphics)
m (Resto-mod graphics)
Line 18: Line 18:
| [[image:defendercade.jpg|thumb|100px|Defender-Style Marquee]]
| [[image:defendercade.jpg|thumb|100px|Defender-Style Marquee]]
  [[image:pacmamea.jpg|thumb|100px|1Uparcade.com's Pacmamea]]
  [[image:pacmamea.jpg|thumb|100px|1Uparcade.com's Pacmamea]]
  [[image:defmod.jpg|thumb|100px|Defender Control Panel modded for more controls]]
  |[[image:defmod.jpg|thumb|100px|Defender Control Panel modded for more controls]]
#'''Cost''' It's cheaper to just put a Defender marquee and control panel on your cabinet than it is to add bezel, side and front art as well. A marquee and CPO might cost a total of $70, while the full kit might cost $200 to $300.  
#'''Cost''' It's cheaper to just put a Defender marquee and control panel on your cabinet than it is to add bezel, side and front art as well. A marquee and CPO might cost a total of $70, while the full kit might cost $200 to $300.  

Revision as of 11:59, 1 March 2006

Adding graphics to your cabinet can transform it from an oversized PC case into a functional piece of arcade artwork. It's the final touch that can make or break a great cabinet. The right choice of artwork and details can make a generic cabinet look simply amazing, while poorly done artwork options can make the most inventive cabinet design look dull. Though it's easy to overlook this area of cabinet building, it should be considered a crucial final step in creating your personal piece of arcade history.

There are generally 5 main approaches to designing the look of your cabinet that you may want to consider early in the planning phase of your cabinet. Each has drawbacks, and each requires varying degrees of skill to execute. Find detailed descriptions below.

More information to come;

Restoration graphics

One of the most straitforward methods of adding some pizzaz to your cabinet is to use reproduction artwork based on your favorite game. There are many distinctive cabinets that have been released over the years, Pac-Man, Galaga, Defender (all of the Williams cabinets, really) for which artwork is still reproduced by reputable dealers and readily available. If you choose to use repro art there are a few things you need to consider;

  1. cost of reproduction graphics Usually bezels, marquees, and control panel artwork are usually fairly inexpensive and easily available, usually in the range of $10-$50 each. Side art is usually more expensive, running from $50-$300 for a complete set.
  2. availability of repro artwork (if you are interested in something a little more rare it may be difficult to find everything)If your favorite game is Ms. Pac Man you can easily find the art for sale online, at an auction or on eBay for a reasonable price (not necessarily cheap, though) If your favorite game happened to be Defender 3 chances are you're not going to easily find repro or N.O.S (new old-stock) to use on your cab. If you're really restoring a cabinet, it may be worth the wait to find something to complete your rare vintage cab. If you aren't restoring, just pick something else cool... at least that way your cabinet will look good while you're trying to find the rare stuff.
  3. accuracy of available reproduction artworkWhile most reproduction houses have high quality artwork available, you may want to investigate the quality & reputation a little bit before you lay down your hard earned cash. Ask questions about the vendor & about the specific piece of repro art at places like RGVAC or in the artwork section of BYOAC. In my past experience of dealing with repro art I have occasionally been dissatisfied with the material thickness, detail, and color of various pieces from various vendors. In many instances you will have a tough time getting your money back, so it's best to ask your questions first. If you really know what you want, you may find that repro art does not accurately capture proper color, appliqué (foil, embossing) detail, material (smooth, rough, textured,) thickness, strength, or opacity (in the case of marquees or bezels.) Many repro dealers and repro artwork sites may not have access to pristine NOS art to sample when they create repros and their printing method may not capture the original color (like Pac Man yellow) so you may have to settle for "pretty good" in some cases unless you are looking for absolute restoration style accuracy. In that case, buy NOS if you can find it.
  4. difficulty of application of the artwork.In most cases adding artwork should be fairly simple for the average person. Most of it involves the use of adhesives and patience. Many Williams machines use stenciled paint for side and front art, however, and accurate reproduction requires some skill, equipment, and practice. If you don't have the patience to spend days doing the necessary prep & execution required to paint with stencils, you may want to purchase repro stickers instead. If you have absolutely zero patience, you may want to avoid buying large pieces of full side-art stickers (like Centipede) as well. Applying very large stickers requires some skill to reduce bubbles and wrinkles when applying the art. Marquees, correctly sized bezels, and CPOs are fairly easy to apply and the average person should not have a problem.

Resto-mod graphics

Resto-mod is basically anything that is based on a classic design, but does not fully reproduce the original design. There are a few reasons to choose the resto-mod route;

Defender-Style Marquee
1Uparcade.com's Pacmamea
Defender Control Panel modded for more controls
  1. Cost It's cheaper to just put a Defender marquee and control panel on your cabinet than it is to add bezel, side and front art as well. A marquee and CPO might cost a total of $70, while the full kit might cost $200 to $300.
  2. Personal touches "Dee Fender," "LeeVious," "Jim's Pac Man," marquee titles all of questionable taste... but real examples. Each display a little of the personality of the owner.
  3. Making a statement Many people want their machine to be seen as more than a just a box for ONE game. Defendercade, Pacmamea, Hyper-Galaxian. Each marquee title implies that the cabinet is more than just a simple arcade classic.
  4. Physical differences Different sizes of cabinets, different shapes, different configurations of controls on the control panel are a few reasons that physical differences may require you to modify the art of a classic design. For instance, If you love the art from Galaga, but have a generic Dynamo cab, you might have to alter the art a little bit to fit the different cabinet shape. If you are building a Defender shaped cabinet, but want to use a trackball and spinner in addition to the standard defender buttons, you will have to make a few changes to the original defender CPO design.

Resto-mod can be a great shortcut to making a cool cabinet, without some of the cost and complexity involved in fully reproducing the original design. If you aren't careful though, your cabinet can also end up looking cheap and boring, with the art obviously a silly afterthought. Slapping a Galaxian marquee on your cabinet won't in itself make your box look great. A well thought out theme based on a classic design, however, can have some striking results. Great resto-mod designs capture the spirit of the original theme blending the changes perfectly with original art, while adding a dimension of uniqueness, rather than looking like pale imitators.

Original theme graphics

Hogwarts Cabinet by Nannuu
Space Paranoids Cabinet by Jarrett

The most creative and striking cabinets that you'll find are well done original themed cabinets. Executing the creation and design of your own personal themed cabinet can be one of the most difficult methods of adding artwork to your cabinet. The payoffs are huge however, you'll have a great looking cab, a certified point of interest in your game room, and infinite hit points. Creating your own art can be a costly, time consuming and technically difficult option, so you may wan to consider the following before you begin your theme;

  1. Will your theme look good in five years? You don't want to get stuck with a cabinet that's as painful to look at as a faster pussycat tattoo.
  2. If your theme is going to be based on pop culture stuff (like sports teams, movies, or cartoons) can you find enough high resolution artwork to cover a marquee, control panel and side art?
  3. If you have a completely original theme, do you realistically have the time and skill to create artwork from scratch?
  4. Do you have the correct design applications to create your art?
  5. If you are creating side art, you may want to shop around the cost of printing full size side art before you begin. It may be expensive, or even impossible to get art printed large enough to fit your full sized cabinet. You may have to make some sacrifices.
  6. If your concept is awesome, would it be worth a few hundred $$$ to pay somebody to create it for you? You might even find a friend or an art student to give you a little help for free.

It's easy for a custom theme to become an unnattractive hodge podge if you're not careful. If you'd like a few suggestions on design, head over to the Creating Your Own Art From Scratch page.

Physical design

More information to come

Hodge Podge

More information to come