Difference between revisions of "JAMMA"
m |
m (fixed J-Pac link) |
||
| Line 8: | Line 8: | ||
<br> | <br> | ||
| − | The easiest way to connect a PC to an arcade cabinet that is JAMMA ready is to use a [[J-PAC]] keyboard encoder (by Ultimarc). | + | The easiest way to connect a PC to an arcade cabinet that is JAMMA ready is to use a [[Keyboard_Encoders#J-PAC|J-PAC]] keyboard encoder (by Ultimarc). |
<br clear=left> | <br clear=left> | ||
==External links== | ==External links== | ||
*[http://homearcade.org/BBBB/jh.html What To Do With Your JAMMA Harness by Bob Roberts] | *[http://homearcade.org/BBBB/jh.html What To Do With Your JAMMA Harness by Bob Roberts] | ||
*[http://en.wikipedia.org/wiki/JAMMA JAMMA at Wikipedia] | *[http://en.wikipedia.org/wiki/JAMMA JAMMA at Wikipedia] | ||
Revision as of 09:35, 13 March 2006
JAMMA (Japan Arcade Machine Manufacturers' Association) is a standard 56-way connector used on many arcade boards to simplify conversion of cabinets from one game to another. The majority of newer games use a subset of this pinout. Some games (i.e., Street Fighter) which need extra buttons have extra connectors for these additional controls. The JAMMA connector has a .156" pin spacing edge connector (male on the game board). The JAMMA standard was invented in 1985; any game older than this will not be JAMMA.
To connect older non-JAMMA games to a standard JAMMA cabinet a custom wiring harness is needed. In some cases a pre-made convertor harness could be used (the Namco2Jamma convertor shown is available from mikesarcade.com).
The easiest way to connect a PC to an arcade cabinet that is JAMMA ready is to use a J-PAC keyboard encoder (by Ultimarc).
