Difference between revisions of "JAMMA"

From BYOAC New Wiki
Jump to navigation Jump to search
m (Added link to JAMMA page at ArcadeRepairTips.com)
Line 12: Line 12:
 
==External links==
 
==External links==
 
*[http://homearcade.org/BBBB/jh.html What To Do With Your JAMMA Harness by Bob Roberts]
 
*[http://homearcade.org/BBBB/jh.html What To Do With Your JAMMA Harness by Bob Roberts]
 +
*[http://www.arcaderepairtips.com/2010/03/24/getting-familiar-with-the-jamma-standard Getting Familiar With The JAMMA Standard] Basic primer, including video, for JAMMA
 
*[http://en.wikipedia.org/wiki/JAMMA JAMMA at Wikipedia]
 
*[http://en.wikipedia.org/wiki/JAMMA JAMMA at Wikipedia]
  

Revision as of 11:43, 30 July 2010

Brjammaharness.jpg
JAMMA Pinout from BitWalk.com

JAMMA (Japan Arcade Machine Manufacturers' Association) is a standard 56-way connector used on many arcade boards to simplify conversion of cabinets from one game to another. The majority of newer games use a subset of this pinout. Some games (i.e., Street Fighter) which need extra buttons have extra connectors for these additional controls. The JAMMA connector has a .156" pin spacing edge connector (male on the game board). The JAMMA standard was invented in 1985; any game older than this will not be JAMMA.


To connect older non-JAMMA games to a standard JAMMA cabinet a custom wiring harness is needed. In some cases a pre-made convertor harness could be used (the Namco2Jamma convertor shown is available from mikesarcade.com).

Namco to JAMMA harness


The easiest way to connect a PC to an arcade cabinet that is JAMMA ready is to use a J-PAC keyboard encoder (by Ultimarc).

External links

See Also