Soft-15khz

About
The project “Soft-15KHz” is about reprogramming of videoadapters and/or their drivers to make them usable with normal Arcade monitors and/or TVs.

It does this by doing small changes to the windows registry to add typical arcade screen resolutions, as well as tweaking some existing ones, and locking out all others.

Status
The project is to be consideres ALPHA Status but should work as intended.

   * Features
         o Frontend for Windows 98*, 2000 and XP
         o 15KHz Resolutions.
         o 25KHz Resolutions.
         o 31KHz Resolutions.
         o ATI Catalyst supported.
         o NVidia ForceWare supported.
         o Matrox Drivers supported.
         o 3Dfx Drivers supported.

     * only ATI on Windows 98.

   * Planned Features
         o 35-38KHz Resolutions.
         o Other Drivers supported.

Development
The use of the project is totaly free, however developing is not, as it sometimes requires to buy certain stuff, most likely new or special video cards. So if you like the program feel free to donate some money via paypal to "sailorsat@animeger.de".

Screenshots and Downloads
For Screenshots and Downloads please look at this Thread.

Resolutions in Detail
Here is a list of resolutions currently used.

   * 15KHz
         o 240 x 240 @ 60Hz
         o 256 x 240 @ 60Hz
         o 256 x 256 @ 60Hz
         o 256 x 264 @ 60Hz
         o 304 x 240 @ 60Hz
         o 321 x 240 @ 60Hz *
         o 321 x 256 @ 60Hz *
         o 336 x 240 @ 60Hz
         o 352 x 256 @ 60Hz
         o 352 x 264 @ 60Hz
         o 352 x 288 @ 50Hz **
         o 368 x 240 @ 60Hz
         o 384 x 288 @ 50Hz **
         o 392 x 240 @ 60Hz
         o 401 x 256 @ 53Hz * **
         o 448 x 240 @ 60Hz
         o 512 x 240 @ 60Hz
         o 512 x 288 @ 50Hz **
         o 632 x 264 @ 56Hz **
         o 640 x 240 @ 60Hz
         o 640 x 288 @ 50Hz **
         o 640 x 240 @ 60Hz
         o 512 x 448 @ 60Hz Interlace
         o 512 x 512 @ 60Hz Interlace
         o 640 x 480 @ 60Hz Interlace
         o 720 x 480 @ 60Hz Interlace
         o 800 x 600 @ 50Hz Interlace **
         o 1024 x 768 @ 50Hz Interlace **

     * "Fake"-Resolution to avoid DirectX-Problems.
     ** Says 60Hz in Windows.

   * 25KHz
         o 448 x 384 @ 60Hz
         o 512 x 384 @ 60Hz

   * 31KHz
         o 512 x 448 @ 60Hz
         o 512 x 512 @ 60Hz
         o 640 x 480 @ 60Hz
         o 720 x 480 @ 60Hz
         o 800 x 600 @ 50Hz **
         o 1024 x 768 @ 50Hz **

     ** Says 60Hz in Windows.

Supported Drivers und Adapters
It should work with any NVidia (ForceWare 66.93 and up), ATI (Catalyst 2.5 and up), Matrox PowerDesk and 3Dfx Voodoo3/4/5 Driver, which themselfs support a large number of modern video adapters. Attention! The Windows default drivers are NOT compatible.

For a selection of tested drivers and adapters please look at : this Thread.

Frequently Asked Questions
For a list of frequently asked questions please look at this Thread.

Additional Information

   * Basic Formulas to calculate resolutions. (In German)

   * Information on Windows and the Drivers. (In German)