Restoring & Recreating Artwork

From BYOAC New Wiki
Revision as of 17:01, 3 March 2006 by Felsir (talk | contribs) (added some content...)
Jump to navigation Jump to search


This page requires attention. Please remove this notice {{Cleanup}} from the article once any formatting problems have been corrected, and any notes regarding content correction & clarification have been removed. Inclusion of this notice guarantees that this page will remain tagged for cleanup and listed in the cleanup page. For tips on cleaning and formatting see Cleanup process


Restoring

Recover artwork that has been painted over

Many cabinets are refitted with new circuit boards to play different games. Some manufacturers supplied new marquees etc. others used a cabinet with a generic design. In many cases however the circuit boards were replaced and the cabinet was repainted in a generic colour.

To remove the layer of paint make careful use of a heatgun and a scraper. Be aware that sometimes the paint has been soaked in too much that the original layer of artwork is destroyed.

Retrieved from "http://wiki.arcadecontrols.com/index.php?title=Restoring_%26_Recreating_Artwork&oldid=8366"