Pinball Plungers

From BYOAC New Wiki
Revision as of 06:08, 25 August 2006 by Spacefractal (talk) (changed layout a little bit, and uploaded the plunger picture (pictures outside domain should not been used))
Jump to navigation Jump to search

Pinball Plungers can be used in Pinball simulators/emulators. Various methods exists, and are mostly limited by the simulator's logics.

Microswitch

  • A Microswitch which violently gets hit on release (set switch to Normally closed):
Plunger1.jpg
It is said that this method will destroy your microswitch quickly.


Leaf Switch

  • A Leaf switch is closed when the pinball plunger is pulled back:
DSC06490.jpg
http://singleclick.com/gallery/v/Joe-Elwell/album324/DSC06492.jpg.html

See Also

Pinball Circuit - Pinball Circuit