|
|
| Line 1: |
Line 1: |
| − | A '''Spinner''' is a knob that can be spun rapidly in either direction to move an on-screen paddle or character. Spinners provide precise analog control like a mouse, but act only along one axis. Spinners were used for many popular early arcade games such as Pong, Tempest, Arkanoid, and Tron.
| |
| | {{Cleanup}} | | {{Cleanup}} |
| − | | + | This page should contain brief descriptions of various spinners available, and details of their setup. If any one portion of the page starts getting a little too long, a seperate page may be started for that topic. |
| − | =What is a Spinner?=
| |
| − | | |
| − | You might remember the spinner from games like Tempest and Arkanoid. The player turns a knob to move the on-screen character. But what's going on behind the scenes; what's that knob attached to?
| |
| − | | |
| − | Underneath the control panel, the shaft comes down from the knob above. Mounted on the shaft, is an optical encoder wheel- a flat disk with notches cut around the outside edge. These notches pass though a set of infra-red optics, that detect the notches as they spin by. There are two sets of optics, spaced such that they see the notches spin by just a little bit out of sync. The combined signal from both of these optics tells the game which direction the disk is turning, and how fast. This is also how a trackball works, as well as a ball-type PC mouse.
| |
| − | | |
| − | If you are buying or building a working spinner for your cabinet, you will need the Spinner (the mechanical part,) the optics(the part that watches the spinning,) and the optical encoder (the part that sends info to the computer.) If a manufacturer advertises "USB Connectivity" that generally means that it is an all in one solution, and no additional parts are required. Otherwise, you'll find that optics are generally included, but an encoder is not. In the rare occurence that your spinner does not have optics included, they can be built with parts from your local electronic store, or you can build them based off of a [[Optical_Encoders#Mouse_Hack|mouse hack.]] If the unit does not ship with an optical encoder, you can purchase one from an aftermarket seller. You can find out more about [[Optical_Encoders|optical encoders here.]]
| |
| − | | |
| − | Note: Paddles, while similar to spinners in that they rotate and have knobs, are usually based on potentiometers (like a volume knob on an old TV or radio), rather than the optics in a spinner. Spinners, as the name suggests, spin. There is no end to how many times the knob can fully rotate in any direction. They often move things in a game in a circular fashion, as in Tempest or TRON. Paddles are the precursor to the spinner. The paddles found on early arcade games (like pong) rotated a full 360 degrees but used a 360 potentiometer (or pot) rather than an optical encoder. Since a pot requires physical contact, they tend to spin less freely than a true spinner. MAME adds to confusion by classifying 270 degree steering wheels as paddles. This is false as most, if not all arcade games that actually used paddles used 360 degree paddles and 270 degree wheels used a regular linear potentiometer (like a radio knob, which can only turn so far). There is such a thing as a 270 degree paddle though, just to make things even more confusing. As a matter of fact, many pong clones used the 270 degree paddles as they were cheaper. Most of your home versions of pong also used the 270 degree paddles. Most emulators will let you play paddle games with a spinner, but spinner games are generally not playable with paddles, mostly due to the fact that paddles just don't spin that well.
| |
| − | | |
| − | =Spinner Varieties=
| |
| − | | |
| − | #Tempest- Fast spinning lightweight spinner, which is very popular with arcade enthusiassts. It has 72 teeth on the encoder wheel, with nylon upper and lower bearings on the shaft. This was the model for the Oscar Vortex aftermarket spinner.
| |
| − | #Arkanoid- The "geared" spinner. Rather than mounting the encoder wheel directly to the shaft, the Arkanoid spinner used two sets of gears between the knob and the encoder wheel, to make the spinner extremely sensitive. While the encoder wheel only has 24 notches, the gearing causes 486 notches to pass through the optics for every turn of the knob! Due to the lightweight and friction from the gearing, the Arkanoid spinner stops the instant you take your hand off the knob.
| |
| − | #360° Steering Wheels - Games like the original Pole Position and Sprint 2 used steering wheels that were essentially giant spinners. The Pole Position steering wheel, for instance, was geared similarly to an Arkanoid spinner. However, the gear ratio was only 5:1 to a 24 notch encoder wheel (96 notches per wheel revolution). This and the mechanical advantage of the large steering wheel rather than a small knob, let the wheel spin freely. Sprint 2 (and Sprint 1, and probably Sprints 4 and 8)used an ungeared 38 notch encoder cup, and spun freely.
| |
| − | #Discs of Tron ''Push/Pull''- This spinner used a giant 128-notch encoder wheel with a push / pull switch feature built into the spindle shaft. When the player pulled up or down on the spinner, a leafswitch was activated. This was used to control the high / low aim of the disc in later levels of the game. Zwackery also used a Push/Pull spinner, and Forgotten Worlds used a push only (no pull) spinner. Oscar Controls marketed a Push/Pull spinner with a slightly different design, and a smaller 72 notch encoder wheel, but it is no longer available for purchase. The Oscar V2 had a Push option, and a Pull kit was rumored to be in the works before Oscar Controls closed down.
| |
| − | | |
| − | =Spinner Brands=
| |
| − | #[http://oscarcontrols.com/ Oscar Controls]- Was a popular manufacturer of spinners for the hobbyist market until recently. Several models were produced over the years, including the Model One, Pro, Vortex, Push/Pull, and V2. These spinners did not enclude an encoder and required connection to an [[Optical_Encoders#Opti-PAC|Opti-Pac]] or to a [[Optical_Encoders#Mouse_Hack|mouse hack]].
| |
| − | #[http://www.slikstik.com/spinfeat.htm SlikStik]- The Tornado is billed as the "longest spinning" spinner on the market, the Tornado is currently the spinner that's been on the market the longest. With an extra-small footprint, and dual-bearing design, the Tornado is very well made. Several knob options are also available. The Tornado comes with it's own USB or PS/2 interface. Plans to sell the Tornado with a plain-jane optic card have also been announced.
| |
| − | #[http://GroovyGameGear.com GroovyGameGear]- The TurboTwist is new to the market. Like the SlikStik Tornado, the TurboTwist also has a small footprint and a dual-bearing design. The TurboTwist has an extra-high resolution encoder wheel, and comes with it's own USB or PS/2 Opti-Wiz interface. The interface can be configured to put the spinner on the X, Y, or Z mouse axis, and will control other optic devices on the remaining two axes, such as a trackball, or additional spinners/steering wheels/optical rotary joysticks. A plain-jane optic card version has also been announced.
| |
| − | #[http://ArcadeGames4U.com ArcadeGames4U]- The cyclone is also new to the market. It has a dual-bearing design, with a lower resolution encoder wheel. The Cyclone ships with an optic card, but no interface.
| |
| − | #[http://www.apachecontrols.com/ Apache Controls]- This is very good looking new addition to the market. The first push/pull for all your DOT enjoyment thats still being sold. There is a review over at RetroBlast you might want to look at [http://www.retroblast.com/reviews/apache-070106-01.html RetroBlast]
| |
| − | #Build Your Own! - Many users have built their own spinners from whatever parts they had available - Hard drive bearings, skateboard bearings, whatever.
| |
| − | | |
| − | =Build Your Own Spinner=
| |
| − | | |
| − | For those of us who would prefer to build their own spinner or cannot afford a retail unit, with a few spare parts that most likely are already lying around, can easily build your own. Here are some links to help you along your way:
| |
| − | | |
| − | '''[http://arcadecontrols.com/files/Miscellaneous/spinner.pdf Nathan Strum's Cheep Spinner]'''
| |
| − | | |
| − | '''[http://www.doughansen.net/arcade/spinner.htm DHansen's Arcade Stupidity Spinner]'''
| |
| − | | |
| − | '''[http://forum.arcadecontrols.com/index.php?topic=17522.0 BYO "Nasty-Spinner" Thread]'''
| |
| − | | |
| − | | |
| − | '''List of compatible hard drives:'''
| |
| − | | |
| − | WD Caviar 1200 210 MB Drive
| |
| − | | |
| − | WD Caviar 11200 1.2 GB Drive
| |
| − | | |
| − | | |
| − | | |
| − | * Please feel free to add to the list of compatible drives if you have successfully built your own spinner with a drive that is not listed.
| |
| − | | |
| − | | |
| − | =FAQs=
| |
| − | ==Which games originally used a spinner==
| |
| − | The list below is non-definitive, but can be used as a guide to find the most common games that can use a spinner.
| |
| − | ===Conventional spinner games===
| |
| − | *Arkanoid arkanoid
| |
| − | *Arkanoid - Revenge of Doh arknoid2
| |
| − | *Blasteroids (version 4) blstroid
| |
| − | *Wolf Pack (prototype) wolfpack
| |
| − | *Tempest (rev 3) tempest
| |
| − | *Tron (set 1) tron
| |
| − | *Mad Planets mplanets
| |
| − | *720 Degrees (set 1) 720
| |
| − | *Aztarac aztarac
| |
| − | *Forgotten Worlds (US) forgottn
| |
| − | *Kozmik Kroozr kroozr
| |
| − | *Crater Raider crater
| |
| − | *Wheel Of Fortune wfortune
| |
| − | *Victory victory
| |
| − | *Omega Race omegrace
| |
| − | *Cameltry (US) cameltry
| |
| − | *Cosmic Chasm (set 1) cchasm
| |
| − | *Dark Planet darkplnt
| |
| − | *Vs. Hot Smash hotsmash
| |
| − | *Boxing Bugs boxingb
| |
| − | *Star Trek startrek
| |
| − | ===Push/pull spinner games===
| |
| − | *Discs of Tron (Upright) dotron
| |
| − | *Zwackery zwackery
| |
| − | ===Horizontal roller===
| |
| − | *Major Havoc (rev 3) mhavoc
| |
| − | *Moonwar moonwar
| |
| − | *Kick (upright) kick
| |
| − | === Vertical roller ===
| |
| − | *Drag Race dragrace
| |
| − | === 360° Steering Wheel===
| |
| − | *Super Sprint ssprint
| |
| − | *APB - All Points Bulletin (set 1) apb
| |
| − | *Pole Position polepos
| |
| − | *Pole Position II polepos2
| |
| − | *Road Blasters (set 1) roadblst
| |
| − | *American Speedway (set 1) amspdwy
| |
| − | *Bad Lands badlands
| |
| − | *Demolition Derby demoderb
| |
| − | *Danny Sullivan's Indy Heat indyheat
| |
| − | *Speed Freak speedfrk
| |
| − | *Ironman Stewart's Super Off-Road offroad
| |
| − | *Ironman Stewart's Super Off-Road Track Pack offroadt
| |
| − | *Turbo turbo
| |
| − | *Konami GT konamigt
| |
| − | *Buggy Challenge buggychl
| |
| − | *Championship Sprint csprint
| |
| − | *Fire Truck firetrk
| |
| − | *Fire Truck firetrk
| |
| − | *Grand Champion grchamp
| |
| − | *Hot Rod (turbo 3 player) hotrod
| |
| − | *Monte Carlo montecar
| |
| − | *Stocker stocker
| |
| − | *Super Speed Race sspeedr
| |
| − | *Final Lap 2 finalap2
| |
| − | *Subs subs
| |
| − | *Mille Miglia 2: Great 1000 Miles Rally (95/05/24) gtmr2
| |
| − | *Over Drive overdriv
| |
| − | *Redline Racer (2 players) redlin2p
| |
| − | *Sprint 1 sprint1
| |
| − | ===Horizontal paddle games===
| |
| − | *Boot Hill boothill
| |
| − | *Clowns (rev. 2) clowns
| |
| − | *Super Breakout sbrkout
| |
| − | *Avalanche avalnche
| |
| − | *Beam Invader beaminv
| |
| − | *Gee Bee geebee
| |
| − | *Warlords warlords
| |
| − | *Field Goal fgoal
| |
| − | *Blue Shark blueshrk
| |
| − | *Circus circus
| |
| − | *Sea Wolf seawolf
| |
| − | *Sea Wolf II seawolf2
| |
| − | ===Vertical paddle games===
| |
| − | *Destroyer destroyr
| |
| − | *Lunar Lander (rev 2) llander
| |
| − | | |
| − | ==Two Spinners on a control panel; is it worth it?==
| |
| − | The answer is an unequivocal ''maybe''. There are several factors to keep in mind when trying to determine whether you should buy and install 2 spinners on your control panel.
| |
| − | #Budget- Spinners are somewhat expensive. Buying 2 aftermarket spinners with optics will set you back about $80-$160.
| |
| − | #Software- Can your software support 2 mice at the same time. Make sure you have a version of mame that can support 2 spinners if they're both individual USB units. If you have them both plugged into an [[Optical_Encoders#Opti-PAC|Optipac]] this won't be a problem.
| |
| − | #Space- Depending on the model, spinners can take up a lot of room under the surface of a control panel. The Oscar Controls Push/Pull spinner was approximately 5.5x6" for instance. Also, the more spinners you have, the less room you may have for other features and joysticks.
| |
| − | #Games- Most importantly, do you like any games that use more than 1 spinner? Below is a (non-definitive) list of multi-spinner games
| |
| − | ##Paddle Games
| |
| − | ###Arkanoid Returns
| |
| − | ###Off the Wall (Atari)
| |
| − | ###Off the Wall (Bally Sente)
| |
| − | ###Warlords (uses 4!)
| |
| − | ###Pop'n Bounce
| |
| − | ###Plump Pop
| |
| − | ###VS Blok Breaker
| |
| − | ##Flying
| |
| − | ###Blasteroids
| |
| − | ###Two Tigers
| |
| − | ##Driving
| |
| − | ###Super Off Road
| |
| − | ### Super Sprint (uses 3!)
| |
| − | ###Championship Super Sprint
| |
| − | ###Bad Lands
| |
| − | ###Ironman Ivan Stewart's Super Off-Road (uses 3!)
| |
| − | ###Ironman Stewart's Super Off-Road Track Pack (uses 3!)
| |
| − | ###Danny Sullivan's Indy Heat
| |
| − | ## Other
| |
| − | ###Atari 2 player games
| |
| − | ###Puzzloop
| |
| − | | |
| − | ==If I can have only a spinner or a trackball... which should I choose==
| |
| − | '''insert pro/con arguments here'''
| |
| − | relevant links in msg board. delete links once the info has been added.
| |
| − | * http://forum.arcadecontrols.com/index.php?topic=25477.0
| |
| − | * http://forum.arcadecontrols.com/index.php?topic=37876.0
| |
| − | * http://forum.arcadecontrols.com/index.php?topic=36036.0
| |
| − | | |
| − | ==See Also==
| |
| − | * [[Controls]]
| |
| − | | |
| − | [[Category:Controls]]
| |
| − | [[Category:Index]]
| |
