Difference between revisions of "Restoring & Recreating Artwork"
Jump to navigation
Jump to search
m |
|||
| Line 6: | Line 6: | ||
To remove the layer of paint make careful use of a heatgun and a scraper. Be aware that sometimes the paint has been soaked in too much that the original layer of artwork is destroyed. | To remove the layer of paint make careful use of a heatgun and a scraper. Be aware that sometimes the paint has been soaked in too much that the original layer of artwork is destroyed. | ||
| + | |||
| + | ==See Also== | ||
| + | * [[Finishing]] | ||
| + | * [[Vendors|Artwork Vendors]] | ||
| + | |||
| + | [[Category:Finishing]] | ||
Revision as of 00:08, 15 July 2006
Restoring
Recover artwork that has been painted over
Many cabinets are refitted with new circuit boards to play different games. Some manufacturers supplied new marquees etc. others used a cabinet with a generic design. In many cases however the circuit boards were replaced and the cabinet was repainted in a generic colour.
To remove the layer of paint make careful use of a heatgun and a scraper. Be aware that sometimes the paint has been soaked in too much that the original layer of artwork is destroyed.
