Difference between revisions of "Pinball Plungers"
Jump to navigation
Jump to search
(Preliminary page.) |
m (changed layout a little bit, and uploaded the plunger picture (pictures outside domain should not been used)) |
||
| Line 2: | Line 2: | ||
==Microswitch== | ==Microswitch== | ||
| − | A Microswitch which violently gets hit on release (set switch to Normally closed): | + | * A Microswitch which violently gets hit on release (set switch to Normally closed): |
| − | + | : [[Image:plunger1.jpg]] | |
| − | + | : It is said that this method will destroy your microswitch quickly. | |
| − | |||
| − | |||
==Leaf Switch== | ==Leaf Switch== | ||
| − | A Leaf switch is closed when the pinball plunger is pulled back: | + | * A Leaf switch is closed when the pinball plunger is pulled back: |
| − | + | ||
| − | + | : [[Image:DSC06490.jpg]] | |
| + | : http://singleclick.com/gallery/v/Joe-Elwell/album324/DSC06492.jpg.html | ||
| + | |||
| + | == See Also == | ||
| + | [http://www.johnsretroarcade.com/hardware_pinball.asp Pinball Circuit] - Pinball Circuit | ||
Revision as of 06:08, 25 August 2006
Pinball Plungers can be used in Pinball simulators/emulators. Various methods exists, and are mostly limited by the simulator's logics.
Microswitch
- A Microswitch which violently gets hit on release (set switch to Normally closed):
- It is said that this method will destroy your microswitch quickly.
Leaf Switch
- A Leaf switch is closed when the pinball plunger is pulled back:
See Also
Pinball Circuit - Pinball Circuit
