Difference between revisions of "JAMMA"
m (fixed J-Pac link) |
|||
| Line 13: | Line 13: | ||
*[http://homearcade.org/BBBB/jh.html What To Do With Your JAMMA Harness by Bob Roberts] | *[http://homearcade.org/BBBB/jh.html What To Do With Your JAMMA Harness by Bob Roberts] | ||
*[http://en.wikipedia.org/wiki/JAMMA JAMMA at Wikipedia] | *[http://en.wikipedia.org/wiki/JAMMA JAMMA at Wikipedia] | ||
| + | |||
| + | ==See Also== | ||
| + | * [[Basics]] | ||
| + | * [[Controls]] | ||
| + | |||
| + | [[Category:Basics]] | ||
| + | [[Category:Controls]] | ||
| + | [[Category:Index]] | ||
Revision as of 00:15, 15 July 2006
JAMMA (Japan Arcade Machine Manufacturers' Association) is a standard 56-way connector used on many arcade boards to simplify conversion of cabinets from one game to another. The majority of newer games use a subset of this pinout. Some games (i.e., Street Fighter) which need extra buttons have extra connectors for these additional controls. The JAMMA connector has a .156" pin spacing edge connector (male on the game board). The JAMMA standard was invented in 1985; any game older than this will not be JAMMA.
To connect older non-JAMMA games to a standard JAMMA cabinet a custom wiring harness is needed. In some cases a pre-made convertor harness could be used (the Namco2Jamma convertor shown is available from mikesarcade.com).
The easiest way to connect a PC to an arcade cabinet that is JAMMA ready is to use a J-PAC keyboard encoder (by Ultimarc).
