Mikes Mini Mame

• Project Type: Bartop/Countertop Arcade Cabinet
• Construction Method: Scratchbuilt
• Monitor Type: 15" LCD TFT
• Interface Type: UltraStik 360
• Special Controls: SpinTrak, AimTrak, UltraLux & Pac-Drive
• OS: Windows XP stripped down using nLite
• Front End: MaLa

Abstract

Hello everybody,

My name is Michael, I live in Cyprus and I am a sys-admin by profession.

This is my second build after a restoration of an old cab back in 2005.

I decided on sharing the details for this latest arcade cabinet in case others might find the read useful or entertaining.

However, the real reason is to keep a record of the build process which for me, is actually more satisfying than finally owning the finished cabinet.

Work started in Nov 2010, with most of the electronics sourced in advance from various locations.

This page will be getting updated following the actual build which in turn heavily depends on my sparce spare time. (so be patient...)

Scope

Google Sketchup Rendering

As you may have guessed from the category this is a Bartop/Countertop/Coffee-tabletop/Whichever-suits-you-besttop project.

The idea for a mini, compact, carry-around cabinet came naturally out of the practical reasons of the small size. However, the real drive was curiosity as to whether the functionality and look and feel of a full sized cab could be successfully scaled down to a portable unit.

Another drive was that being raised within the midsts of the golden age of arcade, for me, any arcade is by now an invaluable memory machine. And lets not forget that several of the old games continue to be extremely addictive and highly playable even compared to today's standards.

To help me better visualise my concept I have used a CAD tool which on numerous occasions proved invaluable. See design section below.

Design

Some X-ray Pics!

Front Side

Back Side

CAD Software

As you may have guessed, its Google Sketchup.

Functionality

I chose to use only 4 player buttons in order to save control panel space. Also personally I prefer more simple games with less buttons. In any case with 4 buttons you can still play more than 90% of the Mame games in fact only excluding some 6-button fighting games.

A spinner/dial/paddle, was also included to allow playing of games like Arkanoid, or driving games which require an analog steering wheel.

Since I discovered more than 30 Mame Light Gun games, a light gun module was necessary...

Start a game with a dedicated green button (with backlight) that can also double as a pause button while in game.

Quit a game with a dedicated red button (with backlight).

Also use backlit buttons for P1 start and Coin.

Ability to regulate sound volume via a knob.

Ability to connect external USB mouse, keyboard and even a secondary control panel for dual game play.

Ability to lock the cab so it can not be used without a physical key. (no child playing without permission...)

Design Steps

Here you can find the various cabinet components in the order that they were designed and incorporated into the Google Sketchup drawing.

Side Panels

Even though this was the first item to be drawn, it was also the most difficult because it provided the base for all the rest. The sidepanels would be constructed out of pine-wood 18mm thick.

Here I had to decide on the following:

• Width of the cabinet (based on the width of the monitor)
• Height of the control panel (based on the height of the controls)
• Overall height (based on the heights of control panel, monitor, marquee)
• Angle for control panel (based on tests using a cardboard moc-up)
• Angle for monitor (based on using my laptop as a moc-up device)

Main Panels

The whole cabinet would be held together by three 12mm panels out of MDF which would hold the two side panels firmly together.

One of the three panels was the control panel itself.

The top panel would have an opening to serve a dual purpose. Firstly as a hot air exhaust vent and secondly as a carrying handle.

Secondary Panels

The rest of the panels were to be constructed from 6mm MDF since they would not have to support any load.

The rear panel would have a circular opening to accept the 120mm fresh air cooling Fan. The Fan would create positive air pressure in the cabinet by drawing air in. The hot air would then be exhausted via the top main panel.

Internal Components

In order for my design to be accurate I measured up and drew as Sketchup components the following:

• Monitor
• Motherboard
• Cooling Fan
• Speakers

I left out the Power Supply since I intended to dismantly that one so finding a place for it later would be no issue.

These components allowed me to preview whether everything would fit and make any necessary adjustments to the overall dimensions well in advance of any actual woodworking.

Marquee and Screen Bezel

Nothing special for the design of these parts.

However during the construction I implemented some interesting methods to hold the Marquee and Screen Bezel in place.

Controls

Again designing the controls within Sketchup helped me find out if everything would fit within the cabinet.

Additionally I used Sketchup to accurately position the controls on the control panel as ergonomically as possible.

Support Bars

A very important part of the design was to obtain the dimensions for all the necessary pine-wood bars (18mm x 18mm) that would hold all the panels firmly together.

I needed the cabinet to be easily serviceable so I decided to use wood screws and glue the support bars to the side panels.

However all the rest of the panels would attach to the support bars via bolts and wood-insert nuts or T-nuts. The screws would be of the socket head type (allen key). This meant that with minimum effort the entire cabinet could be dismantled and re-assembled as many times as I wanted.

Color Scheme

Plain pine wood for the side panels, varnished with a clear wood varnish.
Pine has a natural tendency to turn orange-yellow as it ages so eventually it will blend beutifully with my choise of marquee.
I chose a greyish tone pattern for my CPO. By buying extra material I can cover the rest of the panels as well.

Marquee Art

The Marquee came from Game On Grafix along with the Control Panel Overlay (CPO) shown above.

Unfortunately the guys there could not cut a small enough piece of plexi for me so I had to get the plexi from local vendors.

Hardware

• Mini-ITX form factor Motherboard.
• Intel Atom CPU
• Solid State Disk Drive
• TFT screen
• Logitech Speakers

Computer Platform

I needed something with the following specs:

• Minimum moving parts (low maintenance, low MTBF).

• Low power consumption (less heat to dissipate).

• Small size (to fit in the cab).

• Quiet (low noise, better game sound)

• Powerful enough (to run the basic games that I enjoy most).

Motherboard

Intel D510MO

I went for the Intel D510MO mini-itx form factor (170mm x 170mm) for the following reasons:

1. Small size that would fit the cab and allow room for other components.

2. Ability for passive cooling. (no cpu fan, less noise)

3. Extremely low power consumption. (less heat in a wooden cab is a good thing)

4. Can happily run the majority of the mame games without additional hardware. (i.e. graphics cards)

Full specs here.

Memory

Kingston KVR800D2N5/1G

The motherboard only supports a single chip but one gig is more than enough for Mame.

Monitor

I needed a 4:3 aspect ration monitor so that I could easily accomodate both vertical and horizontal games without having to rotate the screen all the time. I also needed the monitor to be of the LCD/TFT panel type in order to save space, heat and weight.

The problem is that nowadays you can not easily find 4:3 LCD screens since most of the new ones are wide-screen. So if you have one, charish it. Wide screen is not that good for Mame.

Samsung 15" TFT Panel (Syncmaster152T)

Great monitor. Excellent contrast. Had it lying around for the past 5 years and it seemed time I put it to good use.

Dismantling it was not very difficult and after doing so I discovered a hidden bonus. It seems with a VGA gender changer I can connect the motherboard almost directly to the monitor with no additional cable.

Another benefit is that the power supply is an external brick unit, thus the overall thickness of the monitor is very small.

The entire cabinet was designed based on the dimensions of this monitor. For example the internal width is just a few millimiters bigger than the monitor's width and the hight is also accordingly selected to just fit this monitor.

Power Supply

SL-500 Power Supply

This unit has a huge, very quiet 120mm Fan which I plan to place at the back of the cabinet.

But first I need to dismantle it...

Hard Drive

KINGSTON SNV125-S2/30GB SSDNOW V

Naturally I went for a Solid State Drive, because it is faster, noiseless, has lower power consumption and is almost indestructable.

Speakers

Logitech LS11

These tiny speakers have great sound quality and are easy to dismantle.

They also have the volume knob that I want.

USB Extender

Soon...

Marquee Lighting

USB light. More soon...

Power Feeds

Soon...

Power Switch

Soon...

Lock Key

Soon...

Software

Nothing fancy here. Just running MaLa as a single shell application on a cut-down version of XP.

Operating System

I chose Windows XP simply because of the beutiful Mala Front End. Otherwise I could have used the Linux installation from my previous arcade.

In any case, even though I chose Windows I still used nLite to minimise the footbrint of the installation. This way the OS would boot faster and consume less CPU during gaming.

I used nLite to:

• Slipstream SP3 into a Windows XP SP2 installation.
• Slipstream all the D510MO drivers (especially the ones for SATA disks)
• Slipstream all currently available security updates for XP.
• Remove several unneeded parts and functions of the OS

I then created a bootable USB stick containing my fresh XP setup files, plugged it into one of the usb ports and booted the system.

After that, it was a typical Windows installation. The installer detected my SSD drive thanks to the previously slipstreamed SATA drivers and believe it or not it was one of the fastest Windows installations I have ever seen (a few minutes...). This is mainly due to the speed of the SSD drive but also on the fact that I was installing from a USB 2 memory stick instead of a slower CD drive.

The problem was actually creating the bootable USB stick. I formatted the stick using NTFS and used specialised software to create a boot sector on the stick.

Emulator

Mame 32bit version 1.38

Front End

Mala

Controls

Coming soon...

Stick

Soon...

Buttons

Soon...

Rotary Dial

Soon...

Light Gun

Soon...

Woodworking

Let the building begin...

CP mounted

Side Panels

Soon...

• Templates
• Ribs

Rear Panels

Soon...

Control Panel

Soon...

Screen Bezel

Soon...

Marquee

Soon...

• Plexiglass
• Lighting
• Mounting

Back to Bartop/Countertop Projects