Difference between revisions of "OurCade"
(added more examples (those with deadlinks with other category)) |
m (1 revision) |
(No difference)
|
Latest revision as of 09:49, 5 December 2013
- Project Type: Upright Arcade Cabinet
- Construction Method: Converted
- Monitor Type: Arcade Monitor
- Interface Type: Keyboard Encoder (IPAC)
- Special Controls: Trackball
- OS: DOS
- Homepage: http://www.saltyserver.com/salty/ourcade.html
Note: The Above url have a problem! This may redirect to a another page, a errorpage, or not finding the cabinet. Please Fix!
Additional Details
Galaga Conversion - This machine was trashed on the inside but looked great on the outside. This machine sat next to a window in a garage and housed a family of squirels for about 5 years. You can't tell by looking at these final pix but the inside had about 4 inches of dirt and nuts before I got ahold of it. The owner was going to send it to the dump. I saved it and converted it in a way that would be easy to convert back to an original without ANY trace of the conversion (there are traces of the squirrel family though). No holes drilled, no panels cut, used all the original clamps. The control panel snaps right on using the original galaga clamps.
Pictures